Floor Needs a crisp and sophisticated look"
good traction and long wearability are important, the "POLY
CHALLENGER" is the ideal flooring. Manufactured with
"Premier's Multi Layer
Technology" . The vinyl wear abrasion layer
at the top retains colour and wear far longer than any rubber
and single ply sheet flooring.
Challenger can also be custom made to meet your special
requirement like extra heavy duty traffic application, special
colours, thicknesses, sizes and widths. Notably among the
custom developed floorings was an extra heavy duty flooring
we provided to meet a special custom requirement of moving
wheeled trolleys in excess of one tonne weight!
Challenger is being used by some of the most important customers
including the Indian Railways, The Reserve Bank Of India,
The National Thermal Power Corporation, The Department of Telecommunication,
Engineers India Ltd. etc.
Challenger is available in the Following Colours.
Constructed in multiple layers, Poly Challenger is composed
of Poly Vinyl Chloride (PVC) resin, Plasticizers, Pigments and
Specification and Technical Data
MM, 1.5 MM, 2.0 MM,3MM
mm X 305 mm pack size
Std.100 PCs/box or as per order
610mm X 610mm pack size
Std.25 PCs/box or as per order
to 2 MTS. width . Standard width 1.5 mtr.
Standard length per roll 20 Mtrs or as per order.
RDSD Specs. C-815(Rev. 1 & Rev. 2) & BS- 3261
(Click for detailed technical
Challenger is available in India through our dealer and distributor
network. You may kindly contact our
Marketing Department at Head Office or any of our Regional
Offices For more Information.
For your overseas requirement, buyers may Kindly contact our Export
Marketing Department for immediate feedback.
If desired a Poly Challenger roll installation can be heat
welded toprovide for a 100% seamless water proof and germ free
environment. Special Heat Welding Cords/ Electrodes for
these installations are available in diameters of 1mm, 2mm,
3mm & 4mm. Premier recommends floor laying and heat welding
operations to be carried out by trained personnel only.
Installation must be according to the norms laid down in BS:8203/1987
& AS:1884/ 1985. Before installation, ensure that the sub-floor
is clean, even, hard and moisture free. Poly Challenger should
be allowed to relax for 24 hours at uniform room temperature between
18°C to 25°C before installation.
achieve a smooth and hygienic finish, Polyfloor Sheets should
be hot seam welded with welding rods. For a superior finish, use
good Acrylic Glue.
depends on the intensity and nature of traffic or end user requirements.
For Polyfloor it is recommended that the floor be cleaned and
Polished after laying.